Zortrax Apoller Smart Vapor Smoothing Device
Estimated Arrival: Between Feb 24 and Mar 01.
Shipping: Free Fast Shipping for All Orders Over $199!
Zortrax Apoller Smart Vapor Smoothing Device
Special Offer! Get an Extra 7% Off + Free Fast Shipping + No Sales Tax ➤ Use Code "3DSALE"! Limited Time Offer!
🚚 In stock and ready to ship. Fast air delivery! ✈️
Price Guarantee: We provide all 3D printers with the lowest price in the USA. So if you find a lower price from an online retailer on an identical, in-stock product, tell us and we'll match the price.
Zortrax Apoller is a smart device that automatically smooths FDM 3D printed models with MEK or acetone vapors to remove visible layering.
- 300x250x250 mm smoothing chamber
- Zortrax SVS technology
- MEK and acetone compatibility
- Intuitive touch interface
- Wi-Fi and Ethernet connectivity
- Compatibility with Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro, and Z-HIPS
- Compatibility with external materials including ABS, ASA, and HIPS
- Advanced vapor circulation system
- ATEX compliant safety systems
The smoothing process is fully automated and run by proprietary algorithms managing temperature, pressure, and concentration of solvent's vapors at all times. First, the model has to be placed inside the smoothing chamber. Once this is done, the chamber is heated enough to vaporize the solvent deposited in a sink below the glass tray. Vapors are then circulated spiraling upwards to evenly cover the model. Solvent's vapors condensate on surfaces leaving them with a glossy or matt finish, depending on the filament used. Finally, Zortrax Apoller dries the prints out to make them ready to use straight out of the chamber. Combined weekly output of 4 typical FDM 3D printers can be automatically smoothed within one day. Safety systems have been designed to meet the high standards required by the ATEX 2014/34/EU Directive regulating the equipment intended for explosive atmospheres.
Compatible filaments: ABS, ASA, HIPS
Compatible solvents: Acetone, Butanone (MEK)
Compatible Zortrax filaments: Z-ABS, Z-HIPS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro
Zortrax Apoller is a desktop smart vapor smoothing device offering industrial class performance. Every aspect of a smoothing process is managed by proprietary algorithms to get the looks of FDM 3D printed models on par with injection molded items.
Speed and ease of use.
Models have to be placed in a double-sealed smoothing chamber measuring 300x250x250 mm. Settings are then chosen on an intuitive touchscreen. Once it's done, Zortrax Apoller needs only 3h to evenly smooth all the models inside the chamber.
The SVS technology in Zortrax Apoller relies on advanced proprietary algorithms managing temperature, pressure, and concentration of solvent's vapors in a double sealed, air-tight smoothing chamber. The pressure inside the chamber is kept below the ambient pressure at all times to prevent the vapors from getting outside.
Quality and efficiency.Vapors inside the smoothing chamber are circulated upwards to evenly cover the model. This way all surfaces are smoothed out uniformly. Once the smoothing process is done, Zortrax Apoller lowers the temperature inside to condense the excessive solvent and put it back in the tank. One 300 ml bottle of acetone or MEK can be reused for multiple smoothing sessions.
Safety systems with multiple levels of redundancy have been designed to meet the high standards required by the ATEX 2014/34/EU Directive regulating the equipment intended for explosive atmospheres. That's why Zortrax Apoller is easy to implement in workshops and safe to use.
Zortrax Apoller works with both acetone and butanone (MEK) which are widely available and inexpensive solvents. The device can smooth models 3D printed with Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro, and Z-HIPS, or their third-party equivalents.
Meet the SVS technology
Zortrax Apoller uses the Zortrax SVS (Smart Vapor Smoothing) technology to work with both acetone and butanone (MEK).
Smart Vapor Smoothing (SVS) technology uses proprietary algorithms to manage temperature, pressure, and concentration of solvent's vapors in the Apoller's smoothing chamber. First, the smoothing chamber is heated enough to vaporize the solvent deposited in a sink below the glass tray. Vapors are then circulated spiraling upwards to evenly smooth the models by superficially melting their surfaces. Next, the chamber is heated to dry the print out. Finally, the remaining solvent is brought back to the tank. The entire process takes 3h, regardless of how many models are placed in the smoothing chamber. Models are ready to use shortly after the SVS process is done.
Supports all FDM 3D printers
Zortrax Apoller can smooth models printed on all FDM 3D printers. The device is compatible with filaments based on ABS, HIPS, and ASA, regardless of their manufacturer. This makes Zortrax Apoller a truly stand-alone equipment that does not force the user into a particular choice of 3D printers or filaments provider.
The looks of injection-molded parts
Zortrax Apoller can smooth models 3D printed with Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro, and Z-HIPS, or their third-party equivalents. HIPS-based materials can be smoothed exclusively with MEK while acetone is recommended for Z-ASA. For all other supported filaments both acetone or MEK are applicable. The smoothing process leaves ASA-based materials with a mat finish. Other filaments come out with glossy surfaces. Vapors' circulation system guarantees that even intricately shaped models are smoothed uniformly. Zortrax Apoller also automatically dries the prints out which makes them ready to use shortly after taking them out of the smoothing chamber. That's what makes Zortrax Apoller a desktop device offering an industrial class performance.
A bicycle seat 3D printed with Z-ULTRAT smoothed in Zortrax Apoller to achieve a glossy finish.
A bicycle seat 3D printed with Z-ASA Pro smoothed in Zortrax Apoller to achieve a mat finish.
Smart Vapor Smoothing
The SVS (Smart Vapor Smoothing) technology is compatible with both acetone and butanone (MEK). It works in 4 simple steps.
Step 1 Fill it up
The solvent tank in Zortrax Apoller has to be filled with acetone or MEK, depending on the kind of filament the models intended for smoothing have been 3D printed with.
Step 2 Place models
The models have to be placed inside the smoothing chamber 2-3 cm apart from each other. The chamber has to be closed to proceed further.
Step 3 Choose settings
The type of filament the models have been 3D printed with and the type of solvent in the tank have to be chosen on an intuitive touchscreen.
Step 4 Take models out
The models have to be taken out of the chamber after the smoothing process is done. They are dried out and safe to use straight away. No further steps are necessary.
The vacuum system in Zortrax Apoller prevents the pressure inside the smoothing chamber from getting higher than the pressure outside of it even after the solvent has been vaporized. That's why the vapors are kept inside the chamber instead of being pushed out of it. The vacuum system also acts as an additional safety measure because it keeps the chamber door closed even when there is a power outage. To make this possible, the smoothing chamber in Zortrax Apoller is sealed off from the environment by two sets of seals.
Advanced vapors' circulation and condensation system
The air inside the Zortrax Apoller smoothing chamber is circulated by a meticulously designed system to guarantee high quality automated smoothing. Fragile and intricate details are covered with less solvent to keep their shape intact. Models are uniformly covered with solvents because vapors move around the chamber spiraling upwards. In the last step, the walls of the smoothing chamber are cooled down which enables excessive vapors to condense on their surface. Liquid solvent then flows back to the tank to be reused in the future smoothing sessions.
Advanced safety system
Due to redundancy carefully engineered into the system, Zortrax Apoller offers industrial-class reliability. The device is double sealed off from the environment. At all times the pressure inside the smoothing chamber is kept below the pressure in the room. Besides double seals, this is yet another level of redundancy in the safety system preventing fumes from getting out of the smoothing chamber. It also keeps the chamber closed even when there is a power outage causing its electromagnetic lock to shut down. When the power is back on, Zortrax Apoller automatically decontaminates the chamber before allowing anyone to open it.II -/1G Ex h IIA T2 -/Ga
Compliance with ATEX Directive
Safety systems have been designed to meet the high standards required by the ATEX 2014/34/EU Directive regulating the equipment intended for explosive atmospheres. The ATEX directive consists of two EU directives regulating what equipment is allowed and what safety measures are necessary in an environment with an explosive atmosphere. The name "ATEX" is derived form the French title of the 94/9/EC directive: Appareils destinés à être utilisés en atmosphères explosives.
Zortrax Apoller is both automated and fast which makes it a perfect smoothing equipment for a 3D printing farm.
Its entire workspace can be filled with models, provided they are placed 2-3 cm apart from each other. The device needs same smoothing time and the amount of solvent to provide the same high quality of smoothing, regardless of how many models are put in the chamber.
One Zortrax M200 Plus 3D printer prints a model of a gearbox cover in 73h 40 min working with Z-ABS on 0.14 mm layer height and 50% infill. The printer can print two such models per week and those two models can be smoothed by the Zortrax Apoller in one go. This means 147h 20min worth of 3D printing can be smoothed within just 3h. That's how Zortrax Apoller can process a weekly output of four 3D printers in one day.
Specification for Zortrax Apoller
We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within fourteen days of your purchase date please let us know and we will provide the difference from your original payment as a store credit.
We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within fourteen days of your purchase date we will provide the difference as a store credit as well. To request your store credit simply e-mail us a link to the same product on our website, or on our competitor's website within fourteen days from the date of your order and we will process the credit accordingly.
Our 100% Price Guarantee has some limitations:
- You must purchase the item from our website before requesting your Price Match Guarantee
- Promotions such as rebates and "buy one, get one free" offers are not eligible
- The item must be in stock on the competitor's website
- The competitor must be an online store, they may not have a retail location
- The website cannot be a discounter or auction website (ie; eBay, overstock, etc..)
- The competitor must be an Authorized Retailer of the product in question
- The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax
- The Price Match Guarantee excludes items that are not shipped from the United States
QUESTIONS & ANSWERSAsk a Question
Does this device smooth only the proprietary Z-materials?
Zortrax Apoller can smooth models printed on all FDM, FFF, LPD, and LPD Plus 3D printers. The device is compatible with filaments based on ABS, HIPS, and ASA, regardless of their manufacturer.