Raise3D Pro3 HS 3D Printer

The Raise3D Pro3 HS Series features an auto filament switching function, enabling uninterrupted production. With the capability to print using two larger 2.5 kg filament spools, this machine can now continuously print with up to 5 kg of material. The newly added RFID filament sensor* identifies the filament and verifies the necessary parameters to prevent incorrect material usage. Additionally, the auto filament unloading function reduces manual intervention, resulting in higher production efficiency and less labor involvement.

• 2.5 kg Large Roll Storage Boxes
• Auto Filament Switching
• New RFID Filament Sensor*
• Auto Filament Unloading

(* This feature will be available once the spools support RFID tagging)

Raise3D Key New Upgrades

Built-in Hyper FFF^® Technology

Equipped with a high-flowrate hot end and an active vibration reduction algorithm, the Raise3D Pro3 HS Series is capable of printing at standard speed at 300 mm/s. Even with Hyper Core high-performance materials, it can still reach average speeds of 200-300 mm/s, resulting in a notable improvement in printing speed compared to the existing Raise3D Product Series with the Hyper FFF upgrade.

Compared to the existing Raise3D Pro3 Series, the Pro3 HS Series reduces printing time by 30% to 70%, depending on the size of the model.

Motion Control Upgrade with a Closed-Loop Motor

To further increase the precision of the extruder and stabilize the movement accuracy, the Pro3 HS printers are newly equipped with a closed-loop stepper motor, together with a double-diaphragm couplings and the optimized axis structure. This closed-loop stepper motor enables precise high-speed printing without losing steps, ensuring accurate electronic control. Meanwhile, the noise from the motion is reduced by over 27%.

Auto Filament Switching

When one filament spool runs out of material, the second extruder can continue printing from another spool. This extends the printing time without human intervention and reduces the risk of printing failure due to material depletion.

New Printing Build Plate

The new printing build plate provides a more uniform and powerful magnetic attraction to suppress model warpage. Thinner by 1 mm, it heats up to 100°C two minutes faster than previous versions. The faster heating speed reduces waiting time and improves print efficiency.

New RFID Filament Sensor

The RFID filament sensor* identifies the filament type and verifies the print parameters to ensure successful prints, preventing the use of incorrect materials. This reduces the time users spend checking print jobs, increasing efficiency and print success.
(* This feature will be available once the spools support RFID tagging)

2.5 kg Large Roll Storage Boxes

To reduce the frequent manual filament replacement, the Pro3 HS printers dual-extruder can now print from two external 2.5 kg material boxes*. It can print continuously for up to 120 hours (assuming 1 kg /24 h). The new accessory worked through an added printer interface for material tubes.
(*2.5kg filament box needs to be purchased separately)

Hyper Core Filament and New Hot-End in the Box

Raise3D's newly introduced Hyper Core filaments offer a fast-melting and cooling rate for high-speed printing with an improved Z-direction strength and stiffness, making them ideal for demanding end-use applications. A high flowrate hot-end with silicon nozzle and a spool of Hyper Core filament is included in each Pro3 HS printer package to make composite printing more accessible. 

• Build Volume (W × D × H)
  Pro3 HS:
  Single Extruder Print: 300 × 300 × 300 mm (11.8 × 11.8 × 11.8 inch)
  Dual Extruder Print: 255 × 300 × 300 mm  (10 × 11.8 × 11.8 inch)
  
  Pro3 Plus HS:
  Single Extruder Print: 300 × 300 × 605 mm (11.8 × 11.8 × 23.8 inch)
  Dual Extruder Print: 255 × 300 × 605 mm  (10 × 11.8 × 23.8 inch)
• XYZ Step Size: 0.78125, 0.78125, 0.078125 micron
  
• Standard Printing Speed: 300 mm/s
• Build Plate: Flexible Steel Plate with BuildTak
• Build Plate Leveling: Mesh-leveling with Flatness Detection
• Heated Bed Material: Silicone
• Max Build Plate Temperature: 120 ºC
• Nozzle Diameter: 0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available)
• Max Nozzle Temperature: 320 ºC
• Automatic Filament Switching: Available
• RFID Filament Sensor: Available
• Filament Run-Out Sensor: Available
• Filter: HEPA Filter with Activated Charcoal

• Build Volume (W × D × H)
  Pro3 HS:
  Single Extruder Print: 300 × 300 × 300 mm (11.8 × 11.8 × 11.8 inch)
  Dual Extruder Print: 255 × 300 × 300 mm  (10 × 11.8 × 11.8 inch)
  
  Pro3 Plus HS:
  Single Extruder Print: 300 × 300 × 605 mm (11.8 × 11.8 × 23.8 inch)
  Dual Extruder Print: 255 × 300 × 605 mm  (10 × 11.8 × 23.8 inch)
• XYZ Step Size: 0.78125, 0.78125, 0.078125 micron
  
• Standard Printing Speed: 300 mm/s
• Build Plate: Flexible Steel Plate with BuildTak
• Build Plate Leveling: Mesh-leveling with Flatness Detection
• Heated Bed Material: Silicone
• Max Build Plate Temperature: 120 ºC
• Nozzle Diameter: 0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available)
• Max Nozzle Temperature: 320 ºC
• Automatic Filament Switching: Available
• RFID Filament Sensor: Available
• Filament Run-Out Sensor: Available
• Filter: HEPA Filter with Activated Charcoal