Intamsys Nylon 1.75mm 1Kg Filament
Estimated Arrival: Between Jan 19 and Jan 25. * ETA for USA only
Shipping: Free Fast Shipping to Contiguous U.S. for All Orders Over $199!
Intamsys Nylon 1.75mm 1Kg Filament
iOn™ Nylon 6 Alloy was created to bring practical functionality to the 3D Printing experience.
iOn™ is an engineering grade material that can be used in demanding applications where PLA and ABS fail due to shortcomings in mechanical, thermal, or chemical performance. Select iOn™ Nylon 6 Alloy when you want to create parts that focus on functionality, not just fit and finish. Manufactured in the USA from virgin resins selected specifically for 3D Printing. We use state-of-the-art resins, colorants, manufacturing technologies to give you the best possible printing experience.
- Higher Thermal Resistance vs. ABS
- Superior Impact Strength vs. ABS
- Improved Solvent Resistance vs. ABS
- Low-Gloss Surface
- Excellent Fatigue Resistance
- Lower Friction/Wearv
- Paintable Surface
- Excellent Printability
- Chemical Resistance
iOn™ Nylon 6 Alloy has improved chemical resistance vs. ABS. This creates wider opportunities for prototyping demanding applications in a number of industries.
iOn™ Nylon 6 Alloy Chemical Resistance Chart
Suitable for use on practically ANY desktop 3D Printer that has a heated bed, including Airwolf, Ultimaker, Makerbot, Makergear, Prinrbot, Reprap, Mendel, Prusa, Up! Printers, Solidoodle as well as many more.
Filament diameter specs:
1.75mm, +/- 0.05mm
2.85mm, +/- 0.05mm
Recommended Print Conditions:
Extruder: 240-270°C (ideal layer bonding at 260-270°C), or even hotter if you have an all-metal hot-end. However, do not exceed 300°C to avoid the onset of polymer degradation. Please note: that if you have layer bonding issues, this is a typical sign that you need to use higher extruder temps.
Bed Temp: 100-110°C. This Nylon alloy has a Tg of 105°C, which is higher than most competitive nylons on the market. Therefore, our bed temp recommendations may be higher than what you’re accustomed to when printing with other nylons.
Bed Prep: Ideally use Polyimide Tape & ABS/Acetone Slurry [together] or any surface you’ve been using with nylon-based filaments. Please note that acetone has difficulty dissolving iOn™ and standard ABS should be used to make the slurry.
We typically do not use a fan when printing with iOn™ and have had better success with printers that have an enclosed build area (to keep some heat in).
Drying: iOn™ is an alloy of Nylon therefore absorbs more moisture that what you may be familiar with. If the filament is stored in humid environments for an extended period of time – it will absorb moisture. While not in use, we recommend storing iOn™ in our Mylar pouch HERE. However, if drying is needed (you hear popping noises during printing – generally water boiling off from the resin), then we recommend drying in an oven at 175°F (F, not C) for 2-4 hours. We use a dedicated oven for this purpose and do not recommend using the family oven!! Try a toaster oven – your family will thank you for not turning dinner into a science experiment.
|Melt Flow Index(g/10min)||
|Elongation At Break||
We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price then us within fourteen days of your purchase date please let us know and we will refund the difference from your original payment. We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within fourteen days of your purchase date will refund the difference as well.
To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors website within fourteen days from the date of your order and we will process the credit accordingly.
Our 100% Price Guarantee has some limitations:
- You must purchase the item from our website before requesting your Price Match Guarantee
- Promotions such as rebates and buy one, get one free offers are not eligible
- The item must be in stock on the competitors website
- The competitor must be an online store, they may not have a retail location
- The website can not be a discounter or auction website (ie; eBay, overstock, etc..)
- The competitor must be an Authorized Retailer of the product in question
- The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.