Mass-Portal-MP30-3D-Printer
Mass-Portal-MP30-3D-Printer

Mass Portal MP30 3D Printer

Brand: Mass Portal

Regular price $9,399.00 $7,699.00 On Sale

  • Estimated Arrival: Between Dec 05 and Dec 11. * ETA for USA only

    Shipping: Free Fast Shipping to Contiguous U.S. for All Orders Over $199!

    Why Buy From 3D Printers Depot

    Mass Portal MP30 3D Printer

    Please note that this 3D printer is built-to-order at Mass Portal manufacturer in European Union. Usually, it takes 6-10 weeks to produce the printer.

    Price Guarantee: We provide all 3D printers with the lowest price in the USA. So if you find a lower price from an online retailer on an identical, in-stock product, tell us and we'll match the price.

    Mass-Portal-MP20-3D-Printer

    EXTRUSION SYSTEM

    Single-nozzle bowden
    All-metal hotend and feeder
    Extrusion temperature up to 300 °C
    Included nozzle: 0.4 mm

    BUILD CHAMBER

    Enclosed chamber
    Build volume: 300 mm x 300 mm
    Round glass print bed
    Print bed heating up to 120 °C

    PRINTER

    Technology: Fused Filament Fabrication (FFF)
    Build volume (d x h): 300 mm x 300 mm, cylindric
    Motion system: precision linear guideways
    Maximum printhead travel speed: 250 mm/s XYZ
    accuracy: 6, 6, 5 micron
    Ultimate layer resolution: 50 micron
    Electronics: 32-bit
    Filament: Filament sensor
    Firmware: open-source Repetier-Firmware
    Monitoring: built-in HD camera (optionally)
    Connectivity: USB 2.0 and Ethernet jacks, Wi-Fi
    Automation ready: yes (software interfaces)

    CHAMBER

    Build chamber: enclosed
    Build chamber door: polycarbonate
    Build chamber illumination: yes

    BUILD PLATE

    Type: glass plate
    Temperature up to 120 °C
    Heatup time: 5 min

    POWER REQUIREMENTS

    Max: 565 W

    PRINTER SIZE

    Dimensions (w x d x h):
    425 mm x 470 mm x 855 mm
    425 mm x 490 mm x 855 mm (with spool holder)
    Weight: 40 kg
    Shipping dimensions (w x d x h):
    720 mm x 800 mm x 1200 mm
    Shipping weight: 70 kg

    REGULATORY COMPLIANCE

    CE, WEEE

    SAFETY

    Air filtering: air & active carbon filters
    Overheating protection: yes

    AMBIENT CONDITIONS

    Operating ambient temperature: 15-35 °C, 10-90 % RH

    SOFTWARE

    Supplied software:
    FabControl® (printing, drying profile
    management software)
    FabControl® Embedded (device control
    software)
    Supported 3D models file format : .stl, .obj, .3mf
    Supported print file format: .gcode (up to 150MB)

    EXTRUSION SYSTEM

    Single-nozzle bowden
    All-metal hotend and feeder
    Extrusion temperature up to 300 °C
    Included nozzle: 0.4 mm

    BUILD CHAMBER

    Enclosed chamber
    Build volume: 300 mm x 300 mm
    Round glass print bed
    Print bed heating up to 120 °C

    PRINTER

    Technology: Fused Filament Fabrication (FFF)
    Build volume (d x h): 300 mm x 300 mm, cylindric
    Motion system: precision linear guideways
    Maximum printhead travel speed: 250 mm/s XYZ
    accuracy: 6, 6, 5 micron
    Ultimate layer resolution: 50 micron
    Electronics: 32-bit
    Filament: Filament sensor
    Firmware: open-source Repetier-Firmware
    Monitoring: built-in HD camera (optionally)
    Connectivity: USB 2.0 and Ethernet jacks, Wi-Fi
    Automation ready: yes (software interfaces)

    CHAMBER

    Build chamber: enclosed
    Build chamber door: polycarbonate
    Build chamber illumination: yes

    BUILD PLATE

    Type: glass plate
    Temperature up to 120 °C
    Heatup time: 5 min

    POWER REQUIREMENTS

    Max: 565 W

    PRINTER SIZE

    Dimensions (w x d x h):
    425 mm x 470 mm x 855 mm
    425 mm x 490 mm x 855 mm (with spool holder)
    Weight: 40 kg
    Shipping dimensions (w x d x h):
    720 mm x 800 mm x 1200 mm
    Shipping weight: 70 kg

    REGULATORY COMPLIANCE

    CE, WEEE

    SAFETY

    Air filtering: air & active carbon filters
    Overheating protection: yes

    AMBIENT CONDITIONS

    Operating ambient temperature: 15-35 °C, 10-90 % RH

    SOFTWARE

    Supplied software:
    FabControl® (printing, drying profile
    management software)
    FabControl® Embedded (device control
    software)
    Supported 3D models file format : .stl, .obj, .3mf
    Supported print file format: .gcode (up to 150MB)

    Price Guarantee

    We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within fourteen days of your purchase date please let us know and we will provide the difference from your original payment as a store credit.

    We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within fourteen days of your purchase date we will provide the difference as a store credit as well. To request your store credit simply e-mail us a link to the same product on our website, or on our competitor's website within fourteen days from the date of your order and we will process the credit accordingly.

    Our 100% Price Guarantee has some limitations:

    • You must purchase the item from our website before requesting your Price Match Guarantee
    • Promotions such as rebates and "buy one, get one free" offers are not eligible
    • The item must be in stock on the competitor's website
    • The competitor must be an online store, they may not have a retail location
    • The website cannot be a discounter or auction website (ie; eBay, overstock, etc..)
    • The competitor must be an Authorized Retailer of the product in question
    • The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax
    • The Price Match Guarantee excludes items that are not shipped from the United States

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    Customer Reviews

    Based on 1 review Write a review