Raise3D Industrial PPA CF Filament - RFID

Raise3D Industrial PPA CF Filament - RFID

Color: Black (PMS: Black 7C)
Specifications: 1.75 mm/ 1 kg

Raise3D Industrial PPA CF Filament is a carbon fiber-reinforced composite filament material based on PPA (polyphthalamide or high-performance/high-temperature Nylon). Thanks to its high-performance Nylon matrix, this composite filament has superior mechanical and thermal properties when compared to other Nylon filaments. With well controlled dispersion and length-distribution of chopped carbon fibers (15 wt.%), PPA CF has lower density, lower moisture absorption, high strength and rigidity, high wear and creep resistance, and excellent chemical and heat resistance. It is promising for end-use applications in the automotive, aerospace, electrical and electronics (E&E) industries.

This filament is compatible with Raise3D Industrial PPA Support Filament.

About the RFID version filament

This version comes with an RFID tag. When printed on the Pro3 HS Series 3D printers, the Pro3 HS Series RFID filament sensor can identify the filament type and verify the print parameters. However, this type of RFID-enabled filament can also be used on other compatible Raise3D 3D printers, even if the printer is not equipped with an RFID sensor.

Please find the slicing profiles of Raise3D Industrial PPA CF Filament below:

E2CF: Speed - Standard - High Quality

Pro3 Series/ Pro2 Series/ E2/ N Series: N/A

*Due to the higher fiber content of PPA filaments, when printing PPA CF and PPA GF, an extra wear-resistant nozzle and extrusion system are required for a consistent printing performance. The E2CF and the RMF500 are specially designed for printing high-performance fiber-reinforced composite filaments. As such, please use the Raise3D Industrial PPA CF filament and PPA GF filament exclusively on the E2CF and the RMF500.

Specifications:

All specimens were annealed at 100°C for 8h, and immerged in ambient temperature for 3 days prior to testing.
Note：
1. Abrasion of the brass nozzle happens frequently when printing PPA CF. Using abrasion resistance nozzle, as hardened steel and above grade nozzle is highly recommended.
2. Please dry the filament at 80-100°C for 6-12 hours to restore the printing quality of Raise3D Industrial PPA CF.
3. After drying, we recommend to store PPA CF filament into Raise3D Filament Dry Box during the printing.
4. After the printing, it is recommended to anneal the printed part at 80-100°C for 8 hours.
5. After annealing, max. 0.5% dimensional shrinkage could be observed in Z-axis depending on infill and layer height, no obvious dimensional shrinkage in XY-axis.
6. If PPA CF is used as the support material for itself, please remove the support structure after annealing.
Otherwise, the support structure could be permanently bonded to the model after moisture absorption.

Specifications:

All specimens were annealed at 100°C for 8h, and immerged in ambient temperature for 3 days prior to testing.
Note：
1. Abrasion of the brass nozzle happens frequently when printing PPA CF. Using abrasion resistance nozzle, as hardened steel and above grade nozzle is highly recommended.
2. Please dry the filament at 80-100°C for 6-12 hours to restore the printing quality of Raise3D Industrial PPA CF.
3. After drying, we recommend to store PPA CF filament into Raise3D Filament Dry Box during the printing.
4. After the printing, it is recommended to anneal the printed part at 80-100°C for 8 hours.
5. After annealing, max. 0.5% dimensional shrinkage could be observed in Z-axis depending on infill and layer height, no obvious dimensional shrinkage in XY-axis.
6. If PPA CF is used as the support material for itself, please remove the support structure after annealing.
Otherwise, the support structure could be permanently bonded to the model after moisture absorption.

Price Guarantee

We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within fourteen days of your purchase date please let us know and we will provide the difference from your original payment as a store credit.

We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within fourteen days of your purchase date we will provide the difference as a store credit as well. To request your store credit simply e-mail us a link to the same product on our website, or on our competitor's website within fourteen days from the date of your order and we will process the credit accordingly.

Our 100% Price Guarantee has some limitations:

• You must purchase the item from our website before requesting your Price Match Guarantee
• Promotions such as rebates and "buy one, get one free" offers are not eligible
• The item must be in stock on the competitor's website
• The competitor must be an online store, they may not have a retail location
• The website cannot be a discounter or auction website (ie; eBay, overstock, etc..)
• The competitor must be an Authorized Retailer of the product in question
• The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax
• The Price Match Guarantee excludes items that are not shipped from the United States