{"product_id":"raise3d-industrial-pa12-cf-support-filament-rfid","title":"Raise3D Industrial PA12 CF Support Filament - RFID","description":"\u003ch3\u003eRaise3D Industrial PA12 CF Support Filament - RFID\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eColor: Pink (PMS: 509C\/ RAL: 3015)\u003cbr\u003eSpecifications: 1.75 mm\/ 1 kg\u003c\/p\u003e\n\u003cp\u003eRaise3D Industrial PA12 CF Support Filament is a break-away support material specially developed for carbon fiber reinforced composite materials. It creates a stable support structure during the printing process, providing proper adhesion to printed surfaces and counteracting any tendency to warp. As such, it significantly improves overhang surface quality and the hollows of printed items. After a print is finished, the support structure can easily be removed or broken away from the printed parts. This support material has broad compatibility with many high-performance carbon fiber reinforced composite filaments and is more cost-effective when compared with water-soluble support material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the RFID version filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version comes with an RFID tag. When printed on the Pro3 HS Series 3D printers, the Pro3 HS Series RFID filament sensor can identify the filament type and verify the print parameters. However, this type of RFID-enabled filament can also be used on other compatible Raise3D 3D printers, even if the printer is not equipped with an RFID sensor.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/Raise3D-Industrial-PA12-CF-Support_TDS_V1_83e3b57f-3a96-4577-946f-3240d5daca2b.pdf?v=1783554325\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProperty\u003c\/td\u003e\n\u003ctd\u003eTesting Method\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eRoundnes Typical Value s\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (g\/cm3 at 21.5 °C)\u003c\/td\u003e\n\u003ctd\u003eASTM D792\u003c\/td\u003e\n\u003ctd\u003e1.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt index (g\/10 min)\u003c\/td\u003e\n\u003ctd\u003e250 °C, 2.16 kg\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdor\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003ctd\u003eAlmost odorless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eInsoluble in water\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\" style=\"width: 100%;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\" style=\"width: 50%;\"\u003e \u003ccol width=\"100\" style=\"width: 50%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"1\" colspan=\"2\"\u003eMaterial Compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePA12 CF\u003c\/td\u003e\n\u003ctd\u003e++\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003ePA based filament\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e++\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003ePA based CF filaments\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e++\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eOther CF filaments\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e++ support the model very well.\u003cbr\u003e+ generally support the model depending on its geometry.\u003cbr\u003e- generally doesn’t support the model depending on its geometry.\u003cbr\u003e-- do not support the model.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNote：\u003cbr\u003e1. It is recommended to use hardening steel nozzle, tungsten steel or ruby nozzle to avoid nozzle abrasion.\u003cbr\u003e2. PA12 CF Support is sensitive to moisture and should always be stored and used under dry conditions\u003cbr\u003e(relative humidity below 20%). \u003cbr\u003e3. Dry PA12 CF support in the oven at at 80°C for 6-8 hours before printing.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProperty\u003c\/td\u003e\n\u003ctd\u003eTesting Method\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eRoundnes Typical Value s\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (g\/cm3 at 21.5 °C)\u003c\/td\u003e\n\u003ctd\u003eASTM D792\u003c\/td\u003e\n\u003ctd\u003e1.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt index (g\/10 min)\u003c\/td\u003e\n\u003ctd\u003e250 °C, 2.16 kg\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdor\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003ctd\u003eAlmost odorless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eInsoluble in water\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\" style=\"width: 100%;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\" style=\"width: 50%;\"\u003e \u003ccol width=\"100\" style=\"width: 50%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"1\" colspan=\"2\"\u003eMaterial Compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePA12 CF\u003c\/td\u003e\n\u003ctd\u003e++\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003ePA based filament\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e++\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003ePA based CF filaments\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e++\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eOther CF filaments\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e++ support the model very well.\u003cbr\u003e+ generally support the model depending on its geometry.\u003cbr\u003e- generally doesn’t support the model depending on its geometry.\u003cbr\u003e-- do not support the model.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNote：\u003cbr\u003e1. It is recommended to use hardening steel nozzle, tungsten steel or ruby nozzle to avoid nozzle abrasion.\u003cbr\u003e2. PA12 CF Support is sensitive to moisture and should always be stored and used under dry conditions\u003cbr\u003e(relative humidity below 20%). \u003cbr\u003e3. Dry PA12 CF support in the oven at at 80°C for 6-8 hours before printing.\u003c\/p\u003e","brand":"Raise3D","offers":[{"title":"Pink","offer_id":39705175130194,"sku":"","price":24800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/Raise3DPA12-CF-SupportFilament.png?v=1743711364","url":"https:\/\/3dprintersdepot.com\/en-jp\/products\/raise3d-industrial-pa12-cf-support-filament-rfid","provider":"3D Printers Depot®","version":"1.0","type":"link"}