{"product_id":"raise3d-hyper-core-abs-cf15-filament-2-5-kg-rfid","title":"Raise3D Hyper Core ABS CF15 Filament (2.5 kg) - RFID","description":"\u003ch3\u003eRaise3D Hyper Core ABS CF15 Filament (2.5 kg) - RFID\u003c\/h3\u003e\n\u003cp\u003eColor: Black (Black 6 C\/ RAL 7024)\u003c\/p\u003e\n\u003cp\u003eSpecifications: 1.75 mm\/ 2.5 kg\u003c\/p\u003e\n\u003cp\u003eRaise3D’s Hyper Core ABS CF15 filament is specially developed utilizing special extrusion technology to form a fiber-rich inner core where most of the carbon fibers are well-aligned and distributed. During high-speed FFF printing, the outstanding heat conductivity of carbon-fiber core accelerates filament melting in the hot end. Moreover, the residual thermal energy of the fiber-rich inner core promotes the interlayer bonding of ABS across the adjacent lines to form a smooth and strong part. The Hyper Core ABS CF15 filament is designed for a fast-melting rate as well as balancing print quality, performance and cost.\u003c\/p\u003e\n\u003cp\u003eHyper Core ABS CF15 inherits excellent impact toughness, good chemical resistance and low moisture absorption of terpolymer ABS matrix. Moreover, special fiber distribution improves the Z-direction strength and stiffness, in addition to the prolonging the life of the nozzle. It is an ideal choice for volume production of industrial-grade applications where high performance, stability and efficiency are required.\u003c\/p\u003e\n\u003cp\u003e2.5 kg filament allows for uninterrupted batch printing and continuous printing for large models. It is provided inside a sealed dry storage bag, and the filament outlet and shaft ensure the printer smoothly loads the filament while also keeping the filament dry.\u003c\/p\u003e\n\u003cp\u003eUsers can install the 2.5 kg filament directly inside the Raise3D RMF500 filaments cartridges. For instructions on how to unpack and load this filament, please refer to the \u003ca href=\"https:\/\/s1.raise3d.com\/2023\/12\/24.003-EN.1.0.20231007-How-to-Unpack-the-2.5-kg-Filament-Bag.pdf\"\u003eHow to Unpack the 2.5 kg Filament Bag Manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBenefits of 2.5 kg Filament:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUninterrupted long-term batch printing\u003c\/li\u003e\n\u003cli\u003eContinuous printing for large models\u003c\/li\u003e\n\u003cli\u003eSimplified operation with less filament change\u003c\/li\u003e\n\u003cli\u003eFilament bag keeps the filament dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/3dprintersdepot.com\/products\/raise3d-rmf500-large-volume-industrial-grade-3d-printer\" target=\"_blank\"\u003eRaise3D RMF500\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFilament Support: \u003ca href=\"https:\/\/3dprintersdepot.com\/products\/raise3d-industrial-pet-support-filament-rfid?_pos=1\u0026amp;_sid=d3ce7715b\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003eRaise3D Industrial PET Support\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the RFID version filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version comes with an RFID tag. When printed on the Pro3 HS Series 3D printers, the Pro3 HS Series RFID filament sensor can identify the filament type and verify the print parameters. However, this type of RFID-enabled filament can also be used on other compatible Raise3D 3D printers, even if the printer is not equipped with an RFID sensor.\u003c\/p\u003e\n\u003cp\u003e*Please use the latest ideaMaker Version for Hyper Core ABS CF15 filament.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/Raise3D_Hyper-Core-ABS-CF15_SDS_US_V1.0_d7fd1fd9-b683-48c2-94de-158a8f5cf34f.pdf?v=1783549641\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; height: 176.344px;\" data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 17.8571%;\" width=\"100\"\u003e \u003ccol style=\"width: 17.8571%;\" width=\"100\"\u003e \u003ccol style=\"width: 17.8571%;\" width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\" colspan=\"3\" rowspan=\"1\"\u003eGeneral Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eProperty\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eTesting Method\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eTypical Value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eDensity (g\/cm³)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eISO 1183, GB\/T 1033\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e1.09\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eWater absorption (%)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eISO 62: Method 1\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e0.28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eOdor\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eAlmost odorless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eSolubility\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eInsoluble in water\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProperty\u003c\/td\u003e\n\u003ctd\u003eTesting Method\u003c\/td\u003e\n\u003ctd\u003eTypical Value\u003cbr\u003e(XY, Flat)\u003c\/td\u003e\n\u003ctd\u003eTypical Value\u003cbr\u003e(ZX, Upright)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYoung’s modulus (MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 527\u003c\/td\u003e\n\u003ctd\u003e4606 ± 192\u003c\/td\u003e\n\u003ctd\u003e2714 ± 88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 527\u003c\/td\u003e\n\u003ctd\u003e48 ± 3\u003c\/td\u003e\n\u003ctd\u003e28 ± 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break (%)\u003c\/td\u003e\n\u003ctd\u003eISO 527\u003c\/td\u003e\n\u003ctd\u003e1.48 ± 0.11\u003c\/td\u003e\n\u003ctd\u003e1.81 ± 0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBending modulus (MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 178\u003c\/td\u003e\n\u003ctd\u003e4365 ± 154\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBending strength (MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 178\u003c\/td\u003e\n\u003ctd\u003e80 ± 1\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy impact strength (kJ\/m²\u003c\/td\u003e\n\u003ctd\u003eISO 179\u003c\/td\u003e\n\u003ctd\u003e8.12 ± 0.78\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003eThermal Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProperty\u003c\/td\u003e\n\u003ctd\u003eTesting Method\u003c\/td\u003e\n\u003ctd\u003eTypical Value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt flow index (g\/10 min)\u003c\/td\u003e\n\u003ctd\u003e250 °C, 2.16 kg\u003c\/td\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"1\" rowspan=\"2\"\u003e\n\u003cdiv\u003eHeat distortion temperature3 \u003cbr\u003e(°C)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003eISO 75 @0.45 MPa\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eISO 75 @1.8 MPa\u003c\/td\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" rowspan=\"1\"\u003eOther Information\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eColor Code\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eRAL 7024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll testing specimens were printed under the following conditions:\u003cbr\u003eNozzle temp.= 250 ºC; Bed temp.= 100 ºC; Print speed= 50 mm\/s; Infill= 100 %; Infill angle= ±45 °.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; height: 176.344px;\" data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 33.3333%;\" width=\"100\"\u003e \u003ccol style=\"width: 33.3333%;\" width=\"100\"\u003e \u003ccol style=\"width: 33.3333%;\" width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\" colspan=\"3\" rowspan=\"1\"\u003eGeneral Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eProperty\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eTesting Method\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eTypical Value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eDensity (g\/cm³)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eISO 1183, GB\/T 1033\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e1.09\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eWater absorption (%)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eISO 62: Method 1\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e0.28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eOdor\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eAlmost odorless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eSolubility\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\/\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eInsoluble in water\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProperty\u003c\/td\u003e\n\u003ctd\u003eTesting Method\u003c\/td\u003e\n\u003ctd\u003eTypical Value\u003cbr\u003e(XY, Flat)\u003c\/td\u003e\n\u003ctd\u003eTypical Value\u003cbr\u003e(ZX, Upright)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYoung’s modulus (MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 527\u003c\/td\u003e\n\u003ctd\u003e4606 ± 192\u003c\/td\u003e\n\u003ctd\u003e2714 ± 88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 527\u003c\/td\u003e\n\u003ctd\u003e48 ± 3\u003c\/td\u003e\n\u003ctd\u003e28 ± 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break (%)\u003c\/td\u003e\n\u003ctd\u003eISO 527\u003c\/td\u003e\n\u003ctd\u003e1.48 ± 0.11\u003c\/td\u003e\n\u003ctd\u003e1.81 ± 0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBending modulus (MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 178\u003c\/td\u003e\n\u003ctd\u003e4365 ± 154\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBending strength (MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 178\u003c\/td\u003e\n\u003ctd\u003e80 ± 1\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy impact strength (kJ\/m²\u003c\/td\u003e\n\u003ctd\u003eISO 179\u003c\/td\u003e\n\u003ctd\u003e8.12 ± 0.78\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003eThermal Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProperty\u003c\/td\u003e\n\u003ctd\u003eTesting Method\u003c\/td\u003e\n\u003ctd\u003eTypical Value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt flow index (g\/10 min)\u003c\/td\u003e\n\u003ctd\u003e250 °C, 2.16 kg\u003c\/td\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"1\" rowspan=\"2\"\u003e\n\u003cdiv\u003eHeat distortion temperature3 \u003cbr\u003e(°C)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003eISO 75 @0.45 MPa\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eISO 75 @1.8 MPa\u003c\/td\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" rowspan=\"1\"\u003eOther Information\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eColor Code\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eRAL 7024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll testing specimens were printed under the following conditions:\u003cbr\u003eNozzle temp.= 250 ºC; Bed temp.= 100 ºC; Print speed= 50 mm\/s; Infill= 100 %; Infill angle= ±45 °.\u003c\/p\u003e","brand":"Raise3D","offers":[{"title":"Black","offer_id":40699779809362,"sku":"","price":254.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/Raise3DHyperCoreABSCF15Filament2.5kg.png?v=1743710013","url":"https:\/\/3dprintersdepot.com\/en-it\/products\/raise3d-hyper-core-abs-cf15-filament-2-5-kg-rfid","provider":"3D Printers Depot®","version":"1.0","type":"link"}