{"product_id":"printdry-filament-dryer-pro4","title":"PrintDry Filament Dryer PRO4","description":"\u003ch3\u003ePrintDry Filament Dryer PRO4\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor quality 3D printing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC).\u003c\/li\u003e\n\u003cli\u003eBuilt-in timer with a maximum time of 48 hours.\u003c\/li\u003e\n\u003cli\u003eBuilt-in humidity monitor showing humidity level between \u0026lt;15% to 99%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"rich-text-paragraph\"\u003e\n\u003cspan class=\"text-only\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe temperature readings are directly measured at the tip of the temperature sensor, located about 15 mm away from the hot air vent.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"text-only\"\u003eThe temperature distribution inside the dryer is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cem\u003e\u003cstrong\u003eAvailable in late July.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cem\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOutside Dimension:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e 340mm (L) x 285mm (W) x 350mm (H)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIt’s the ultimate filament dryer you need for quality 3D printing!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC).\u003c\/li\u003e\n\u003cli\u003eBuilt-in timer with a maximum time of 48 hours.\u003c\/li\u003e\n\u003cli\u003eReal-Time Humidity Monitoring (showing \u0026lt;15% to 99%)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Features.jpg?v=1781830865\" alt=\"PrintDry-Pro4-Features\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003ch3 id=\"h:Now-with-Real-Time-Humidity-Monitoring\" class=\"page-anchor\"\u003e\u003cspan class=\"bold\"\u003eNow with Real-Time Humidity Monitoring\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eSee the humidity drop in real time as the dryer works. Our upgraded filament dryer now comes with a \u003cstrong\u003e\u003cspan class=\"bold\"\u003ereal-time humidity sensor\u003c\/span\u003e\u003c\/strong\u003e, letting you see exactly how your filament is drying. During our tests, the chamber humidity drops from \u003cstrong\u003e\u003cspan class=\"bold\"\u003eover 60% to below 15% in just under FIVE minutes\u003c\/span\u003e\u003c\/strong\u003e, giving you the instant feedback and confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Humidity-Monitoring.gif?v=1781830929\" alt=\"PrintDry-Pro4-Humidity-Monitoring\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Humidity-Monitoring-Chart.gif?v=1781830958\" alt=\"PrintDry-Pro4-Humidity-Monitoring-Chart\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eLarger PTC Hearter\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eA larger PTC heating unit delivers stronger and more consistent heating, helping the dryer reach target temperatures faster and maintaining stable drying conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 id=\"h:New-Heating-Control-Algorithm\" class=\"page-anchor\"\u003e\u003cspan class=\"bold\"\u003eNew Heating Control Algorithm\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eOur upgraded heating control algorithm improves temperature stability while reducing thermal stress on the heating system, helping extend the lifespan of the PTC heater.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-PTC-Hearter.jpg?v=1781831003\" alt=\"PrintDry-Pro4-PTC-Hearter\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePro4 Key Features\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Key-Features.jpg?v=1781831099\" alt=\"PrintDry-Pro4-Key-Features\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDry + Feed\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Dry-Feed.gif?v=1781831186\" alt=\"PrintDry-Pro4-Dry-Feed\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDryer Temperature Measurement\u003c\/h3\u003e\n\u003cp\u003ePrintDry dryer is regulating its temperature by using a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eclose-loop\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesign. When the temperature is above the preset value, the heating unit will be turned off. On the other hand, if the temperature is below the preset value, the heating unit will be turned on. Therefore, the heating unit always have its ON\/OFF cycle. When checking the dryer temperature, the following equipment and method are used.\u003c\/p\u003e\n\u003cp\u003eDevice: PH-1016U Multi-channel Temperature Measurement Device with T, J, K Type Thermocouples, 0.1℃ temperature resolution and 0.5℃ temperature accuracy.\u003c\/p\u003e\n\u003cp\u003eTemperatures are measured at 4 locations -- 3 locations inside a dryer and 1 location outside the dryer.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eT1: measured at the hot air outlet (close to the dryer temperature sensor) as shown in the picture below.\u003c\/li\u003e\n\u003cli\u003eT2: measured in the center half way in the height.\u003c\/li\u003e\n\u003cli\u003eT3: measured in the center about 50mm below the lid internal surface.\u003c\/li\u003e\n\u003cli\u003eT4: room temperature.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature distribution inside the dryer is \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e uniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Dryer-Temperature-Measurement.jpg?v=1781831291\" alt=\"PrintDry-Pro4-Dryer-Temperature-Measurement\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Dryer-temperature-distribution.jpg?v=1781831386\" alt=\"PrintDry-Pro4-Dryer-temperature-distribution\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 id=\"h:spool-adapter-includ\" class=\"page-anchor\"\u003e\n\u003cspan class=\"bold\"\u003eSpool Adapter\u003c\/span\u003e included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 metal shafts\u003c\/li\u003e\n\u003cli\u003e4 big spool adapters\u003c\/li\u003e\n\u003cli\u003e4 small spool adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Spool-Adapter.jpg?v=1781831455\" alt=\"PrintDry-Pro4-Spool-Adapter\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSPECIFICATION:\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOutside Dimension:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e 340mm (L) x 285mm (W) x 350mm (H)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSPECIFICATION\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOutside Dimension:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e 340mm (L) x 285mm (W) x 350mm (H)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e","brand":"Raise3D","offers":[{"title":"Default Title","offer_id":40273521901650,"sku":"","price":303.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0022\/2671\/6784\/files\/PrintDry-Pro4-Main-Picture-2.png?v=1781830741","url":"https:\/\/3dprintersdepot.com\/en-eu\/products\/printdry-filament-dryer-pro4","provider":"3D Printers Depot®","version":"1.0","type":"link"}