Mass Portal MP1200 Large Format Production 3D Printer

Mass Portal MP1200 Large Format Production 3D Printer

Please note that this 3D printer is built-to-order at Mass Portal manufacturer in European Union. Usually, it takes 6-10 weeks to produce the printer.

Price Guarantee: We provide all 3D printers with the lowest price in the USA. So if you find a lower price from an online retailer on an identical, in-stock product, tell us and we'll match the price.

KEY FEATURES:

• Large build volume
• Multiple hotend options
• Advanced software
• Enclosed chamber
• Built to order

EXTRUSION SYSTEM

Multiple hotend options
All-metal hotend and feeder
Extrusion temperature up to 475 °C
Included nozzle: 0.8 mm

BUILD CHAMBER

Enclosed,controlled chamber
Build volume: 0600 mm x 1000 mm
Round glass printbed
Printbed heating up to 120 °C

PRINTER

Technology: Fused Filament Fabrication (FFF)
Build volume (d x h): 0600 mm x 1000 mm or
0350 mm x 1200 mm, cylindric
Motion system: precision linear guideways
Maximum printhead travel speed: 250 mm/s
XYZ accuracy: 6, 6, 5 micron
Ultimate layer resolution: 50 micron
Electronics: 32-bit
Firmware: open-source Repetier-Firmware
Remote monitoring: built-in HD camera
Connectivity: USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready: yes (software interfaces)

CHAMBER

Build chamber: enclosed
Build chamber door: tempered glass
Build chamber illumination: yes

BUILD PLATE

Type: glass plate
Temperature up to 120 °C
Heatup time: 5 min

POWER REQUIREMENTS

Installed power: 1500 W

REGULATORY COMPLIANCE

CE, WEEE

SAFETY

Air filtering: air & active carbon filters
Door safety switch: yes
Overheating protection: yes

PRINTER SIZE

Dimensions (w x d x h): 880 mm x 844 mm x 2100 mm

AMBIENT CONDITIONS

Operating ambient temperature: 15-35 °C, 10-90 % RH

SOFTWARE

Supplied software:
Slic3r (slicer)
FabControl® (printing, drying profile management software)
FabControl® Embedded (device control software)
Supported 3D models file format : .stl, .obj, .3mf
Supported print file format: .gcode (up to 150MB)

EXTRUSION SYSTEM

Multiple hotend options
All-metal hotend and feeder
Extrusion temperature up to 475 °C
Included nozzle: 0.8 mm

BUILD CHAMBER

Enclosed,controlled chamber
Build volume: 0600 mm x 1000 mm
Round glass printbed
Printbed heating up to 120 °C

PRINTER

Technology: Fused Filament Fabrication (FFF)
Build volume (d x h): 0600 mm x 1000 mm or
0350 mm x 1200 mm, cylindric
Motion system: precision linear guideways
Maximum printhead travel speed: 250 mm/s
XYZ accuracy: 6, 6, 5 micron
Ultimate layer resolution: 50 micron
Electronics: 32-bit
Firmware: open-source Repetier-Firmware
Remote monitoring: built-in HD camera
Connectivity: USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready: yes (software interfaces)

CHAMBER

Build chamber: enclosed
Build chamber door: tempered glass
Build chamber illumination: yes

BUILD PLATE

Type: glass plate
Temperature up to 120 °C
Heatup time: 5 min

POWER REQUIREMENTS

Installed power: 1500 W

REGULATORY COMPLIANCE

CE, WEEE

SAFETY

Air filtering: air & active carbon filters
Door safety switch: yes
Overheating protection: yes

PRINTER SIZE

Dimensions (w x d x h): 880 mm x 844 mm x 2100 mm

AMBIENT CONDITIONS

Operating ambient temperature: 15-35 °C, 10-90 % RH

SOFTWARE

Supplied software:
Slic3r (slicer)
FabControl® (printing, drying profile management software)
FabControl® Embedded (device control software)
Supported 3D models file format : .stl, .obj, .3mf
Supported print file format: .gcode (up to 150MB)

Price Guarantee

We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within fourteen days of your purchase date please let us know and we will provide the difference from your original payment as a store credit.

We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within fourteen days of your purchase date we will provide the difference as a store credit as well. To request your store credit simply e-mail us a link to the same product on our website, or on our competitor's website within fourteen days from the date of your order and we will process the credit accordingly.

Our 100% Price Guarantee has some limitations:

• You must purchase the item from our website before requesting your Price Match Guarantee
• Promotions such as rebates and "buy one, get one free" offers are not eligible
• The item must be in stock on the competitor's website
• The competitor must be an online store, they may not have a retail location
• The website cannot be a discounter or auction website (ie; eBay, overstock, etc..)
• The competitor must be an Authorized Retailer of the product in question
• The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax
• The Price Match Guarantee excludes items that are not shipped from the United States